When we need to select TV programs when watching TV, we need to use a function at this time, that is, the remote control. Only the remote control can help us choose more favorite TV programs. In order to get better usage habits, people generally use remote controls now. The advantage of the remote control is that it can be adapted to any model of TV. So do you know how to use the TV remote control?
How to use the TV remote control
1. Install the battery.
Use the remote control normally. Need to install the battery, pay attention to use a new battery, do not mix old and new batteries, it is easy to damage the remote control and shorten the use time. Multimedia remote control price
2. How to turn on the TV.
Press and hold the red button on the remote control to turn on the sleeping TV. But some remote controls need to turn on the TV to control, then turn on the TV through the switch on the TV.
3. The method of changing the channel.
Before using the remote control to change channels, you must first activate the remote control. Generally, there are buttons on the remote control for major brands of TVs, such as 1 button for Changhong TV, 2 button for LG TV and so on. According to your TV brand, press and hold the corresponding number button for a long time until the red indicator light of the remote control flashes, indicating that the remote control has been activated and can be used normally.
4. If there is no corresponding button indication for a brand-name TV, you can press and hold the general button, and also wait for the indicator light to flash before releasing your hand. If the remote control fails during the use of the remote control, press and hold the volume button of the remote control, and the red indicator light of the remote control will flash back to normal.
5. Find out the corresponding three-digit code representing the TV to be remotely controlled from the code table.
6. Press and hold the [Setting] key (about a few seconds) until the indicator lights up, then release the [Setting] key.
7. Enter the detected three-digit code, each time you enter a digit, the indicator light flashes once, and when the three-digit number is entered, the indicator light goes out, and the setting is completed. Note: If there are more than one group of codes found, first choose the first group code, if the TV brand is not in this code table, then try the first or third method. If it flashes twice or more continuously, it means that the entered code is wrong, and you need to re-enter the three-digit code. 2.4G packet remote control
The use of the TV remote control is very simple, the first thing we have to do is to install the battery for the remote control. Need to install the battery to use. After installing the battery, it can be used. There are usually text prompts on the TV remote control. You can observe it when you use it. There is also the manual of the remote control that comes with the general TV, you can also study the method carefully. Well, the use of the TV remote control is introduced here.
